Chimney Flashing Kit For Glamping Tent

Short Description:

- Use with existing stove jacks or when installing a stove jack in a tent or shelter, simple solution to flashing a penetration through a canvas tent

- Made with silicone to resist high temperatures, creates a tight seal around the pipe, and provides flexibility

- Available in 2 models and marked with dimensions to allow for easy sizing, suitable for various occasions

- Stainless steel rings and hex nuts hold the Flashing Kit in place

- Resistance to ultraviolet rays, cracking & weathering

  • Material: Silica Gel and Stainless Steel
  • Size: Pipe size:45-85 mm Base size:160 mm
  • MOQ: 200 sets
  • Production Time: Around 35 days after receipt of deposit.
  • Model: CA06
  • Product Detail

    Product Tags

    Chimney Flashing Kit Description

    The High quality Tent Stove Jack For Tent is a heat resistant modular flashing designed to vent the flue pipe of a tent stove through the roof or side wall of any canvas tent. The stove jack available and can be cut to fit flue pipes up to different diameter. The flashing kit is made out of stainless steel and rubber to securely hold hot flue pipe sections a safe distance away from the canvas. All the hardware required for installation is included for quick and easy assembly. Kindly recommends mounting your wall tent stove jack at least 3 feet away from the firebox of most tent stoves.

    Our canvas tent stove jack are perfect for sealing around a newly installed vent pipe or replacing an aged roof boot that's past its prime. Constructed from the highest quality Silicone, tent stove jack is designed to provide maximum Ozone, UV light and temperature resistance. These boots are tested to withstand 300 degrees Celsius of continuous temperature, making these glamping accessories ideal for sealing around hot stove pipes. It is held in place by stainless steel rings with hexagonal screw. This Chimney Flashing Kit can be used to create a weather-tight seal on existing stove jacks or when installing a stove jack in a tent or shelter.

    Chimney Flashing Kit Details

    Model: CA06

    Size: Suitable for 60 mm diameter chimney

    Comes with a 75- 95 mm hole as standard,

    Has a cut lines for 95mm-  114mm, 114mm- 133mm, 133mm -146mm, 146mm - 160mm, flues.

    Predrilled circular clamping rings*2

    Silicone seal*1 bolts and screws*6

    Chimney Flashing Kit Pictures

    Flashing Kit
    camper tent
    hike tent

  • Previous:
  • Next:

  • Related Products